Steam boiler E-1.0-0.9 M-Z

The E-1.0-0.9 M-Z steam boiler is used by enterprises to generate steam above saturated steam. This boiler model operates on liquid fuel, including diesel, fuel oil, fuel oil, kerosene, and other fuels. The boiler is equipped with a burner, which heats the heat exchanger when the liquid fuel is burned.

The E-1.0-0.9 M-Z steam boiler has two drums located at the top and bottom of the boiler. These drums are connected by a tube bundle. The pressure difference between the drums allows natural water circulation within the boiler. Steam is generated in the upper drum and is diverted for consumption. Direct combustion of the fuel occurs in the firebox, which is located at the front of the boiler. An afterburner chamber is located behind the firebox to maximize thermal energy transfer to the heat exchanger, increasing boiler efficiency. To further enhance efficiency, an economizer is used, which heats the feedwater using exhaust gases.

The steam boiler E-1.0-0.9 M-Z is supplied as a single block in casing and with a full
Key words: Steam boiler E-1, 0-0, 9 M-3, steam boiler, steam boilers, boiler e, e 1/9, E 1 - 9, boiler E-1, 0-0, 9 M-3, Steam boiler E-1, 9, E-1, steam boiler e 1.0/0.9, boilers e-1.0-0.9, steam boilers e 1 0 0
Country of origin: Ukraine
Weight: 4300 t
Height: 2900.0 (mm)
Width: 2350.0 (mm)
Warranty period: 24 (months)
Mains voltage: 220~240 V
Nominal power: 1.0 (MW)
Efficiency: 94.0 (%)
Maximum working pressure: 10.0 (bar)
Maximum ambient temperature: 50.0 (deg.)
Current frequency: 50 (Hz)
Minimum ambient temperature: 5.0 (deg.)
Length: 4200.0 (mm)
Minimum working pressure: 1.0 (bar)
Types of liquid fuel: Fuel oil, waste oil, diesel
Industrial boiler type by fuel type: Gas
Type of industrial boiler by type of coolant: Steam
Type of industrial boiler by design features: Water-tube
Type of coolant: Superheated steam
Steam boiler type: Industrial
Steam capacity: 1.0 (t/h)
Maximum coolant temperature: 175.0 (deg.)