Air heating furnace using waste oil

A direct-fired air heater is a device designed for space heating using used motor, industrial, and transmission oils. The heater is a simple appliance requiring little maintenance. Preventative maintenance is performed by the owner.

• High air flow of 2270 m3/hour

• Warm air does not mix with combustion products; at the outlet of the heater, the air has a temperature of 30-80 °C,

• Easy maintenance;

• Equipped with power regulation from 10 to 35 kW, which will allow you to save fuel and maintain the temperature you need

• Durable construction with long service life

• High reliability and safety.

• A highly efficient heat exchanger with cooling fins and a U-shaped combustion chamber ensures high efficiency

• Steel body with wear-resistant outer surface coated with powder paint;

• Low emissions are achieved through complete combustion of the fuel, resulting in a blue flame.

1) Reliability and simplicity of design

• The stoves are very reliable and easy to operate. Installation only requires installing the chimney pipe and lowering the fuel pump into the fuel tank.

• Fuel combustion occurs without odor or smoke.

• A powerful fan increases the speed of heating the room.

• Italian electronics

• Gear pump

2) Work safety

• Automatic protection against fuel overflow and overheating ensures safe operation of the furnace.

3) Ease of use

• Remote fuel tank (not included).

• No additional filtration or heating of the fuel is required.

• After 8–24 hours of continuous operation, only cleaning of the combustion chamber plate from combustion products is required.

• All spare parts are domestically produced and inexpensive.

• The set temperature ranges from 0-30 °C and is maintained and controlled using a remote thermostat.