Automation for solid fuel boilers Tech ST-84

The Tech ST-84 automation system for solid fuel boilers is a flush-mounted controller. It is designed to optimize heating system operation. The automation system controls the central heating pumps and the blower fan. It is used on boilers with manual solid fuel loading.

Operating principles of the device

The Tech ST-84 controller maintains the required operating temperature in heating or hot water systems. This is achieved by smoothly adjusting the fan speed. The device comes with factory default settings, but the operator can customize them for a specific system (primarily central heating or hot water systems) if needed.

The Tech ST-84 control unit is designed to be easily installed on the boiler. The lower temperature limit, p
Keywords: Automation for solid fuel boilers Tech ST-84, Heating, Components for heating equipment, Automation for heating equipment, components for heating equipment, spare parts
Condition: New
Mains voltage: 220~240 V
Purpose of the component: For solid fuel boilers
Component type: Automatic
Power consumption (W): 2
DHW pump control: No
Automatic control for: Manually loaded boilers
Fan control: Yes
Underfloor heating pump control: No
Fuel feed mechanism control (auger): No
Solar Collector Pump Control: No
Three-way valve control: No
Throttle Control: No
Second fan control: No
Recirculation pump control: No
Pellet burner control: No
Heating pump control: Yes
Flue gas temperature sensor: No
Lambda probe: No
Temperature setting range, °C: +45...+80
Heating pump or DHW pump control: No
Maximum temperature measurement range, up to °C: 85
Heating pump load, up to (A): 1
Fan load, up to (A): 1