Tech ST-20 heating pump automation

The boiler's operation is ensured by specialized components, one of which is the central heating water circulation pump. To ensure the heat exchanger operates efficiently and consumes only the required amount of fuel, a special Tech ST-20 regulator should be used. This device can control the temperature range using a potentiometer. If you want to be sure your boiler is operating smoothly, it's worth purchasing this equipment and verifying its effectiveness.

Purpose

Let's take a closer look at the device's operating algorithm. Everything revolves around the central heating pump. The ST-20 controller activates the pump when the temperature reaches a specified level and turns it off when the boiler cools 2°C below the set point. This saves energy and extends the pump's life. The device...
Keywords: Tech ST-20 heating pump automation, Heating, Heating equipment components, Heating equipment automation, heating equipment components, spare parts
Condition: New
Mains voltage: 220~240 V
Purpose of the component: For pump groups
Component type: Automatic
Power consumption (W): 1
DHW pump control: No
Automation for: Heating/DHW pump
Fan control: No
Underfloor heating pump control: No
Fuel feed mechanism control (auger): No
Solar Collector Pump Control: No
Three-way valve control: No
Throttle Control: No
Second fan control: No
Recirculation pump control: No
Pellet burner control: No
Heating pump control: Yes
Flue gas temperature sensor: No
Lambda probe: No
Set temperature setting range, °C: +25...+85
Heating pump or DHW pump control: No
Maximum temperature measurement range, up to °C: 85
Heating pump load, up to (A): 1