Steam solid fuel boiler series KE-2.5-14

The KE-2.5-14 series solid fuel steam boiler is used in industrial settings to generate steam and hot water for residential and administrative buildings. The KE solid fuel boiler has a capacity of 2.5 tons of steam per hour and an operating pressure of 1.3 MPa. In addition to the furnace, the KE steam boiler also features an afterburner chamber, which combusts gases released from the fuel that were not burned in the furnace, increasing boiler efficiency to 85%.

Technical characteristics of the KE-2.5-14 solid fuel steam boiler

Key words: Steam solid fuel boiler KE-2, 5-14 series, KE boiler, steam boiler, steam boiler KE, solid fuel boiler, KE series boiler, Steam solid fuel boiler, steam solid fuel boiler KE, industrial
Country of origin: Ukraine
Weight: 8 t
Height: 5050 mm
Width: 4640 mm
Warranty period: 24 months
Nominal capacity: 8150 MW
Efficiency: 85%
Maximum working pressure: 13 bar
Current frequency: 50 Hz
Length: 5660 mm
Types of solid fuel: Oats, Anthracite, Briquettes, Brown coal, Oil shale, Firewood, Coal, Coke, Bark, Buckwheat husk, Sunflower husk, Sawdust, Pellets, Straw, Peat, Husk, Wood chips
Minimum working pressure: 13 bar
Industrial boiler type by fuel type: Solid fuel
Type of industrial boiler by type of coolant: Steam
Type of industrial boiler by design features: Water-tube
Type of coolant: Superheated steam
Steam boiler type: Industrial
Steam capacity: 2.5 t/h
Maximum coolant temperature: 194 degrees.

Boiler type	KE-2.5-14
Working pressure, MPa (kgf/cm²)	1.3 (13)
Steam capacity, t/h (MW)	2.5 (1.82)
Steam temperature, °C	194
Efficiency,%, not less than	80.8