Circulation pump IMP PUMPS GHN 20/40-180

Circulation pump IMP PUMPS GHN 20/40-180

IMP PUMPS GHN circulation pumps are designed for installation in heating systems . The maximum system pressure is 1 MPa (10 bar). The maximum pumped fluid temperature is 110°C, and the minimum is -10°C. Either clean water or water with added antifreeze suitable for central heating systems can be used.

The ambient temperature where the pump is installed must not exceed 35°C and must not be below the freezing point of the pumped medium. During operation, the pump itself or the pumped medium heats it up; contact with the pump may cause burns.

Keywords: IMP PUMPS GHN 20/40-180 Circulation Pump, IMP PUMPS Pumping Equipment, IMP PUMPS Circulation Pumps, Pumping Equipment, Circulation Pumps, Industrial Circulation Pumps, Circulation Pumps
Brand: IMP PUMPS
Maximum capacity: 3.5 m3/hour
Current consumption: 0.15 / 0.21 A
Performance: 58.3 l/min
Material: Cast iron
Minimum water temperature: 1 °C
Maximum working pressure: 10 bar
Protection class: IP44
Maximum ambient temperature: 40°C
Maximum water temperature: 110°C
Installation type: Vertical
Pump location: Surface
Water quality: Clean
Purpose: Heating
Motor power: 50 W
Connection type: 1 ¼"
Voltage: 230V/50Hz
Installation length: 180 mm
Maximum pressure: 4 m