WBS steel solid fuel boilers are produced with a nominal power of 20 to 110 kW for heating both small and large areas.
It is designed for burning solid fuels and has the option of connecting an oil, diesel, pellet or gas burner.
Product Features: - Simple installation and easy maintenance
- The design complies with the requirements of EN 303-5 standards
- The combustion chamber is equipped with a large area heat exchanger and a low resistance coefficient.
- The large combustion chamber door allows for easy loading of fuel - even large logs
- The boiler is equipped with a ribbed heat exchanger surface and a three-stage smoke exhaust chamber, which allows it to significantly increase efficiency.
- A flange is mounted on the lower door for connecting a gas, oil, diesel or pellet burner to the boiler.
- Easy cleaning and maintenance
- A 3 bar relief valve is included with the boiler.
- A removable metal ash grate protects the combustion chamber from fire.
Three levels of protection: 1) Thermostatic draft regulator;
2) Blow-off valve;
3) Boil-out prevention device – installed in the upper part of the boiler. In case of overheating, it opens the damper using a thermostatic valve to lower the temperature inside the boiler.
WBS boiler components 1. Temperature indicator
2. Body
3. Highly efficient thermal insulation
4. Anti-boil device
5. Three-stage smoke exhaust chamber
6. Heat exchanger
7. Combustion chamber
8. Metal ash grate
9. Ash container
10. Burner flange (optional)
11. Chimney
12. Hot water outlet
13. Draft thermostat
14. Discharge channel
