Flanged circulation electric pump "SPRUT" 1VP-DN40

Application area:
VP series circulation electric pumps are designed for pumping working fluids in heating, air conditioning, cold and hot water supply systems, as well as in industrial installations for pumping hot and cold chemically non-aggressive liquids.

Restrictions:
• working fluid: clean, non-viscous, non-aggressive liquids, not containing solid particles or fibers, similar to water in density and chemical activity
• total mineralization of water, no more than 1500 g/m3?
• content of mechanical impurities, no more than 0.1%
• maximum particle size, no more than 0.2 mm
• total liquid hardness, no more than 700 µg-eq/kg
• content of iron compounds, no more than 500 mcg/kg
• dissolved oxygen content, no more than 50 μg/kg
• petroleum product content, no more than 1 mg/kg
• pH value 6.5-9.5
• maximum working pressure: 1 MPa (10 bar)
• lower and upper limit values
Keywords: SPRUT 1VP-DN40 flanged circulation electric pump, Circulation electric pumps, Industrial electric pumps, SPRUT 1VP-DN40 flanged circulation electric pump, circulation pump
Mains voltage: 380~400 V
Body material: Cast iron
Maximum head: 16 m
Frequency: 50 Hz
Connection type: Flanged
Maximum working pressure: 10 bar
Power consumption: 1000 W
Capacity: 15.5 cubic meters/hour
Pump type: For heating systems
Protection class of electronic equipment housings: IP44
Pump installation: Vertical
Maximum working fluid temperature: 110 degrees.
Rotor type: "Dry"
Overheat protection: Yes
Number of speeds: 1 pc.
Minimum working fluid temperature: -10 degrees.
Increased pressure: yes
Shaft: Stainless steel
Insulation heat resistance class: H
Working fluid: Clean, non-viscous, non-aggressive liquids, free from solid particles or fibers, similar to water in density and chemical activity
Working wheel: Centrifugal, closed type, made of cast iron or brass
Engine: Asynchronous two-pole, squirrel-cage rotor, self-ventilated
Connection type: Flanged