Automation for solid fuel boilers Tech ST-88 zPID

The Tech ST-88 zPID solid fuel boiler automation system is a unique controller used for heating units powered by solid fuel. The control unit coordinates the water supply and movement within the system, as well as the fan operation. This ensures a constant temperature within the unit. If the temperature falls below a preset limit, the Tech ST-88 zPID solid fuel boiler automation system operates continuously, activating the fan for ventilation.

The controller produces a continuous output signal, which is recognized by the system using a PID control algorithm. The Tech ST-88 zPID automation system for solid fuel boilers determines the unit's operating power by comparing the temperature inside the heating unit and the gases produced exiting the boiler. It initiates
Keywords: Automation for solid fuel boilers Tech ST-88 zPID, Heating, Components for heating equipment, Automation for heating equipment, Components for heating equipment,
Condition: New
Mains voltage: 220~240 V
Purpose of the component: For solid fuel boilers
Component type: Automatic
Possibility of connecting a room thermostat-program: No
Power consumption (W): 5
DHW pump control: Yes
Automatic control for: Manually loaded boilers
Fan control: Yes
Underfloor heating pump control: No
Fuel feed mechanism control (auger): No
Solar Collector Pump Control: No
Three-way valve control: No
Throttle Control: No
Second fan control: No
Recirculation pump control: No
Pellet burner control: No
Heating pump control: Yes
Flue gas temperature sensor: Yes
Lambda probe: No
Temperature setting range, °C: +45...+80
Heating pump or DHW pump control: No
Maximum temperature measurement range, up to °C: 90
Heating pump load, up to (A): 0.5
Fan load, up to (A): 0.6
Fuel level display function: No
Load on the DHW pump, up to (A): 0.5